The Bench · N° 58
“Rubber” can mean FKM, silicone or nitrile, and your wrist can tell
Three straps can share the same product description while differing in heat resistance, oil tolerance, softness, dust attraction and smell. The polymer recipe is the part your skin experiences.
Hen & Mills Editorial · 5 min read · 8 November 2026

“Rubber strap” is a product category, not a full material specification. FKM fluoroelastomer, silicone and nitrile rubber can all be moulded into watch straps, yet they feel, smell and respond to sweat, oil, heat and dust in noticeably different ways.
The initials describe polymer families
NBR is nitrile-butadiene rubber, commonly called nitrile. VMQ is the industry designation for silicone rubber. FKM covers fluoroelastomers built around fluorinated chemistry. Parker's engineering handbook separates these families because their temperature ranges, fluid compatibility and mechanical behaviour differ greatly in sealing applications.
A watch strap adds pigments, fillers, curing agents and surface treatments to the base polymer. Two FKM straps need not feel identical, and an inexpensive product can use “FKM” loosely without disclosing formulation or test evidence. Family name is a useful beginning, not a complete recipe.
Nitrile is practical and familiar
Nitrile rubber is valued for resistance to oils and fuels, useful mechanical strength and manageable cost. It can make a robust strap with a traditional rubber feel. Heat and weathering performance depend on the grade, and prolonged ultraviolet exposure or ozone can be less kind than they are to some alternatives.

For normal wrist use, a well-formulated nitrile strap can last well if it is rinsed and allowed to dry. The material's industrial reputation does not mean every strap should meet petrol, solvent or sunscreen without consequence. Colourants and additives can respond before the base polymer does.
Silicone is soft and tolerant of temperature
Silicone straps are often very flexible, soft and available in vivid colours. Silicone polymers retain useful properties over a broad temperature range and are generally resistant to weathering. That makes them comfortable for sports use and easy to mould into complex forms.
The familiar drawback is surface character. Many silicone formulations attract lint and dust, and a soft strap can feel tacky against warm skin. Tear resistance around a sharp notch or spring-bar hole may be more important than tensile strength measured on an ideal sample. Thoughtful geometry and surface texture make a large difference.
FKM feels denser and cleaner
Fluoroelastomer is prized for resistance to heat, chemicals and oils. In straps it often feels smooth, dense and less eager to collect lint than soft silicone. Edges can hold a crisp shape, giving the strap a more tailored appearance even when the watch is intended for water.

FKM is generally more expensive to formulate and process. The material can also be made in different hardnesses, so the name does not promise pillow-like softness. A thick FKM strap with little taper may feel firmer than a carefully profiled nitrile one despite the more prestigious polymer.
Sweat is not the only chemical
Skin deposits water, salt and oils onto a strap. Sunscreen, insect repellent, soap, perfume and cleaning products add a more complicated mixture. A polymer that handles one fluid well may swell, harden or discolour in another. Parker's compatibility tables are extensive because “chemical resistant” without naming the chemical is nearly meaningless.
Watch use is usually less severe than an industrial seal held at high temperature, but exposure is repeated and trapped between strap and skin. Rinsing after salt water or heavy exercise removes residue before it has days to work. Mild soap recommended by the maker is safer than household solvent.
Smell comes from the formulation
Fresh straps can carry an odour from residual processing chemicals, additives or packaging. Base polymers have different characteristic smells, but scent alone cannot identify a material reliably. Fragrances can even be added to mask an inexpensive compound.
A strong smell that persists, surface oiliness or colour transfer deserves caution. Washing may remove surface residue; it cannot correct incomplete curing or an unstable formulation. Product provenance matters because the skin wears the strap for hours under warmth and pressure.
Allergies need exact ingredients
Many people use these polymers comfortably, but reactions can involve curing agents, accelerators, pigments, metal hardware or trapped moisture rather than the named rubber family. “Hypoallergenic” is a broad marketing phrase unless the manufacturer explains what was tested.
A rash is a reason to stop wearing the strap and let the skin recover. Swapping only from silicone to FKM may help if texture and moisture were the problem, but it is not a medical diagnosis. Cleaning, fit and buckle material belong in the investigation.
Geometry can outweigh chemistry
Ventilation channels reduce the contact area and give sweat somewhere to move. Taper changes stiffness along the wrist. Curved ends can improve the case transition while creating places that hold salt. A thin hinge near the lug can make a firm polymer feel supple without weakening the body of the strap.
Mould quality also determines comfort. Flashing at an edge, a poorly finished keeper or a sharp buckle slot can irritate skin regardless of an excellent compound. The best material in a careless shape remains a careless strap.
Ask for more than “rubber”
A useful specification names the polymer, hardware material, length, taper and buckle system. It should explain water and cleaning guidance. For dive use, check that spring bars or attachment hardware are suitable and that the strap remains secure when stretched or worn over a suit.
If the maker gives no material beyond “rubber”, judge the object without borrowing assumptions from FKM marketing. Flex it, inspect the holes and edges, consider dust pickup and ask how replacements will be supplied.
Your wrist reads the full recipe
Nitrile can be tough and economical. Silicone can be soft, colourful and temperature-tolerant. FKM can be clean-feeling and resistant to oils and heat. None wins every comparison, and formulation plus strap design can reverse expectations.
The wearer experiences friction, moisture, geometry, additives and surface finish at once. That is why two black straps described with the same four letters can feel unrelated after an afternoon. “Rubber” tells you how the category bends. The polymer and the moulding tell you whether you will want to keep it on.


