News · Arnold & Son
Arnold & Son puts agate on both sides of the Time Pyramid 42.5
Two eight-piece editions, red gold with red agate and platinum with blue, carry the stone on the hours ring and again on the case back.
Hen & Mills Editorial · 4 min read · 19 November 2026
- Arnold & Son has released two Agate Editions of its skeleton Time Pyramid 42.5, one in red gold with red agate and one in platinum with blue.
- The agate hours ring is 0.4 mm thick, and a second agate disc of 0.8 mm sits on the case back beneath a sapphire crystal.
- Each version is limited to eight pieces, priced at CHF 49,700 in red gold and CHF 60,500 in platinum, through retailers only.

Stone dials have been the easy answer for a couple of years now. Take a watch you already make, swap the dial for a slice of malachite or tiger's eye, limit it, and wait for the photographs to do the work. We have all seen enough of them to be a bit wary, which is why it is worth saying what Arnold & Son has done differently with a watch that barely has a dial to begin with. The stone here sits on the back of the watch as well as the front, in the two new Arnold & Son Time Pyramid 42.5 Agate Editions.
A ring of agate 0.4 mm thick
The Time Pyramid is a skeleton watch, and the only conventional dial surface on it is the ring that carries the hours. On the earlier 42.5 mm versions that ring is white opal. For these two it is agate cut to 0.4 mm, red in the red gold watch and blue in the platinum one, and at that thickness the brand's photographs show it glowing more than sitting there, a little like the amber end of a boiled sweet held up to a window.
The numerals are white Roman ones and the hands are blue, and around them you are looking straight into the movement, with the balance at the top of the dial under its own bridge and the crown directly below it at six o'clock. That vertical line from crown to balance gives the watch its tapering outline, and it still looks like nothing else at this size.

Two barrels, two gauges and 90 hours
The calibre is the in-house, hand-wound A&S1615, unchanged for these editions. It measures 37.6 mm across and only 4.4 mm thick, runs at 3 Hz and has 27 jewels, and it stores 90 hours across two barrels, which is enough to take the watch off on a Thursday night and find it still running after a long weekend away.
Each barrel gets its own power reserve indicator, one on either side of the hours ring, and that is my favourite thing about the watch. Most power reserve displays are a single needle you glance at twice a week. Here you get to watch the two gauges trade places as the reserve runs down, and it is the sort of small, slightly unnecessary pleasure that tells you a watchmaker enjoyed designing it. The bridges are chamfered by hand with polished flanks and Côtes de Genève, and the screws are blued.
Turn it over and the stone is still there
This is the part that separates the Agate Editions from the usual stone-dial exercise. The case back carries a second disc of the same agate, this time 0.8 mm thick, under a sapphire crystal. Arnold & Son has put stone on the back of a Time Pyramid before, with malachite late last year, so I will not pretend it is a first. It is still the detail I would show people, because a decorated back that only the owner sees is a more interesting use of a semi-precious stone than another front-facing disc.

Red gold or platinum, and nothing in between
Both cases are 42.5 mm across and 10.72 mm thick, with a domed sapphire crystal treated for reflections on both sides, and both are rated to 3 bar, or 30 metres, which is about what you would expect from a precious metal dress watch. The red gold version comes on an amber brown alligator strap and the platinum one on azure blue, each hand-stitched.
If I were choosing, and at these prices I am very much not, it would be the red. The blue is the safer watch and platinum is the more serious metal, but the warm stone against 5N gold and blued hands has a glow the cooler one cannot quite match. John Arnold, the English watchmaker whose name is on the dial, was introduced to King George III in 1764, and I suspect he would have understood the urge to show off a little.
Arnold & Son Time Pyramid 42.5 Agate Editions pricing and availability
The Time Pyramid 42.5 Red Agate, reference 1TPER.Z01A.C1488A, and the Time Pyramid 42.5 Blue Agate, reference 1TPEX.Z01A.C1483X, were announced on 17 November 2026 and are limited to eight pieces each. They are sold through Arnold & Son retailers and not online. Suggested retail prices are CHF 49,700, £52,100 and US$63,400 (red gold) and CHF 60,500, £63,500 and US$77,200 (platinum), with the Swiss franc and sterling figures including VAT and the US dollar figures excluding tax. Arnold & Son does not publish a price in Australian dollars.
The specifications
| References | Red gold: 1TPER.Z01A.C1488A. Platinum: 1TPEX.Z01A.C1483X |
|---|---|
| Case | 42.5 mm x 10.72 mm, 18-carat red gold 5N or 950 platinum |
| Crystal | Domed sapphire, anti-reflective coating on both sides |
| Case back | Red or blue agate disc (0.8 mm) with sapphire crystal |
| Water resistance | 3 bar (30 metres) |
| Movement | Calibre A&S1615, manual winding, 27 jewels, 3 Hz (21,600 vph) |
| Power reserve | 90 hours, two barrels |
| Functions | Hours, minutes, seconds, double power reserve |
| Dial | Agate hours ring, 0.4 mm |
| Strap | Hand-stitched alligator. Red gold: amber brown. Platinum: azure blue |
| Limitation | 8 pieces each |
| Price | Red gold: CHF 49,700, £52,100, US$63,400. Platinum: CHF 60,500, £63,500, US$77,200 |
Straight from the source
Arnold & Son has the full listing on its own site.
View it at Arnold & Son →

