Skip to content
Hen & Mills
Menu

News · Petermann Bédat

Petermann Bédat's Reference 2914 puts a monopusher chronograph in a 36.5 mm platinum case

The Renens workshop leaves out the split-seconds, gains 14 hours of reserve and loses nearly four millimetres of thickness, in a first series of 20 pieces at CHF 180,000 before tax.

Hen & Mills Editorial · 4 min read · 16 November 2026

  • Petermann Bédat's Reference 2914 is a new, simpler interpretation of the chronograph the Renens workshop first presented in 2023 with the split-seconds Reference 2941.
  • Its platinum case measures 36.5 mm across and 9.9 mm thick, around the hand-wound Calibre 234 monopusher with an instantaneous minute counter and solid gold wheels.
  • The first series is 20 pieces in platinum, priced at CHF 180,000 before VAT, with no Australian price or delivery date published so far.
Petermann Bédat Reference 2914 in platinum on a black strap, its semi-open silver dial showing two black-ringed subdials
Photo: Petermann Bédat

If you admired the Reference 2941 from a distance in 2023, you may have wondered, as I did, what the same two watchmakers would build if they gave themselves less to fit in. A split-seconds chronograph is a wonderful thing and also a thick one, and the appeal of this Renens workshop has always been the finishing rather than the function count. The answer went up on the workshop's own site on 12 November, in platinum and at a size that will start arguments, and it is called the Petermann Bédat Reference 2914.

A chronograph with the second hand taken out

Petermann Bédat describes the 2914 as a new interpretation of its chronograph and a new chapter, with the stated priorities being elegance, balance and comfort on the wrist. The plainest way to read that is by subtraction. The 2941 is a monopusher split-seconds chronograph built from 339 components around Calibre 202. The 2914 is a monopusher chronograph with an instantaneous minute counter, built around a different movement, Calibre 234, and the split-seconds mechanism is not part of it.

That is not a downgrade so much as a different brief. An instantaneous counter means the minute hand of the chronograph does not creep towards the next mark, it waits and then jumps at the turn of the minute, which is the fiddly, satisfying way to do it.

36.5 mm, the size restorers remember

The case is platinum, 36.5 mm across and 9.9 mm thick, with soldered lugs and a box sapphire crystal with an anti-reflective coating. Set that against the 2941, which the brand lists at 38.6 mm and 13.7 mm, and the new watch is 2.1 mm narrower and 3.8 mm slimmer. The second number is the one you would feel, because it is the difference between a watch that sits on a cuff and one that goes under it.

The workshop says the proportion comes from its founders' background as restorers of vintage timepieces, and from wanting a watch this size in the collection for a long time. I am firmly on the side of small here. Plenty of people will call 36.5 mm too little watch for the money, and platinum is the reply, because the density of the metal gives a compact case the heft of something much larger, the way a brass doorknob surprises you the first time you unscrew one. Water resistance is not stated.

A dial you look through rather than at

Petermann Bédat has used a partly open dial since its first watch, and the 2914 continues that identity. The dial plates are stainless steel and sapphire, made by Comblémine, and the new touch is solid gold appliques set on the sapphire. The hour, minute and chronograph seconds hands are gold and stainless steel, finished by hand.

The Petermann Bédat Reference 2914 case head seen from above, with its open dial, gold numerals and soldered lugs
Photo: Petermann Bédat

In the brand's photographs that adds up to a silvery brushed plate with two black-ringed subdials, one scaled to 30 and one to 60, warm-toned numerals at 12 and 6, and jewels and wheels showing through the gaps. The brand says the construction was reworked from the 2941 to find a new balance between dial and movement while keeping it readable. Open dials usually trade legibility for theatre, and this one looks like it has kept both.

Gold wheels under the German silver

Calibre 234 is an in-house, hand-wound movement measuring 30 mm across, which leaves it filling almost the whole case. It runs at 18,000 vibrations per hour, the slow traditional rate that lets a chronograph resolve fifths of a second, and it holds 56 hours of power, against 42 in the 2941. It has 21 jewels and a balance spring with a Breguet overcoil.

The main plate and bridges are German silver, with stainless steel parts and solid gold wheels. Petermann Bédat says the going train was redesigned, with hand-bevelled solid gold wheels, to improve reliability, which is the brand's claim and one only years of service can test. The decoration is the familiar list done properly: Côtes de Genève on the bridges with hand-polished chamfers, sun graining and perlage on the main plate, and steel parts bevelled and black polished by hand.

Close view of the hand-finished Calibre 234 in the Petermann Bédat Reference 2914, showing black polished steel and gold wheels
Photo: Petermann Bédat

The buckle is platinum. The strap is not specified, though it is black leather in the photographs.

Why "first glimpse" is the phrase to watch

CHF 180,000 before tax is a number to wince at, so wince, and then look at what is being sold: a hand-finished in-house chronograph from a small workshop, in platinum, in a series of 20. What interests me more is the wording. The brand calls these 20 pieces a first glimpse, and nobody says that about a watch they intend to make only once. I would expect other metals to follow, and I suspect the 2914 is the chronograph this workshop will be known for. Twenty pieces will not take long to count, with or without a chronograph.

Petermann Bédat Reference 2914 pricing and availability

The Reference 2914 opens with what Petermann Bédat calls a first glimpse of 20 pieces in platinum. The workshop publishes no delivery date. Price: CHF 180,000 (excluding VAT). No Australian price is published.

The specifications

Case36.5 mm x 9.9 mm (lug to lug not published)
Case materialPlatinum, soldered lugs
CrystalBox sapphire with anti-reflective coating
DialStainless steel and sapphire plates by Comblémine, solid gold appliques
HandsHour, minute and chronograph seconds hands in gold and stainless steel, finished by hand
MovementCalibre 234, in-house, manual winding, monopusher chronograph with instantaneous minute counter, 30 mm diameter
Frequency18,000 vph
Power reserve56 hours
Jewels21
BucklePlatinum
EditionFirst glimpse of 20 pieces in platinum
PriceCHF 180,000 (excluding VAT)

Straight from the source

Petermann Bédat has the full listing on its own site.

View it at Petermann Bédat →